Give Me A Quote!

 

 

The writer is making a few great points related to How to Troubleshoot and Repair an Electric Water Heater in general in this article further down.

Numerous modern homes take advantage of an electric water heater for their heater, due to its comfort and convenience of use. However, similar to any other electrical devices, problems might arise with its use, unexpectedly. It can be truly discouraging to wake up to a cool shower instead of a warm one or having your bath with water that isn't warm sufficient or perhaps as well hot. Whatever the situation may be, hot water heater problems can be quite aggravating. Luckily, we've made a checklist of possible solutions to your hot water heater issues. There are a variety of elements that could trigger a lot of these troubles, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for safety and security. Whatever the issue is, getting it fixed must not pose excessive of an issue if you adhere to these steps:

 

Call An Expert:

If after changing all defective components and resetting your temperature, the hot water heater still isn't working, you may require to contact a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold taps have actually been switched or it may be undersized for the quantity of warm water needed in your home. Whatever the instance may be, an expert plumber would certainly aid solve the issue.

 

Inspect Your Power Supply:

As fundamental as this might seem, it is extremely necessary. Without sufficient power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, merely turn it off and on once more. Change any damaged or damaged fuse. Test the home appliance with power after these adjustments to see if it's currently working.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to inspect the temperature level setups on your upper thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open the gain access to panel as well as press the red switch for temperature level reset over the thermostat. This need to help heat the water. Turn the breaker back on and also examine if the problem has been fixed.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power problem, then try having a look at your burner if it is still functioning. Examine each of your burner to be sure the problem isn't with any of them. If any of them is defective, change that component and then examine whether the hot water is back on.

 

Conclusion

Water heater problems are not always major. A lot of them are because of minor problems like a blown fuse or damaged burner. Changing the malfunctioning components must work. Nevertheless, if you are still incapable to fix the trouble, give a call to your nearby plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a passionate reader on How to Troubleshoot and Repair an Electric Water Heater, I imagined sharing that piece of content was a good thing. If you please take the time to share this blog post if you enjoyed reading it. Thank you for your time invested reading it.

Schedule A Service Call